Corvette How To's & Feature Articles

 

Corvette Technical Articles
Corvette_Power_Door_Lock_lead

1978-1982 Corvette Power Door Lock Repair

Have you become so frustrated with your non-working power door locks you’ve decided to take drastic measures to pull open the locks. Well, Bunkie, put away those channel locks. The solution is right at hand. The most comm...


1963-1982_Power_Steering_Rebuild_lead_

1963-1982 Corvette Power Steering Rebuild

Some 700 gallons of power steering fluid later, or so it seemed, I figured that I might have a leak somewhere in the steering system of my 1974 Corvette. After a quick degrease of the undercarriage, I discovered that the power ...


mid-year-corvette-taillights-lead-2

1963-1967 Corvette Tail Light Installation

An easy way to enhance the appearance of the tail end of your 63 to 67 Corvette is to replace the tail light assemblies. The mid-year tail light assemblies always seem to get quite a bit of abuse. Road grime, stones and condens...



Parking_Brake_Lead_1

1967-1982 Corvette Parking Brake Rebuild

When you apply the parking brake in your 1967-1982 Corvette, you expect that the car is going to stay put. But that’s not always the case. This is a typical problem for all 67 to 82 Corvettes.  The design of the parking ...


corvette_window_motor_lead

1968-1982 Power Window Motor Replacement

Here’s a project that’s fairly easy to do and only requires standard tools – nothing exotic (assuming you have a clip removal tool). The entire replacement of the power window motor should be completed in about 1....


corvette_headlight_switch_lead

1968-1982 Corvette Headlight Switch Removal and Installation

You pull your Corvette Headlight switch knob out and your lights go on. All of a sudden they go out, then come back on for no apparent reason. Maybe all of the dash lights have gone out or they only come on at one position on t...



corvette-door-window-seals-lead

1969-1982 Corvette Door Outer Window Seals Replacement

When your Corvette door glass is rolled up, is there a large gap between the door and outside of the glass? Well, Pilgrim, there shouldn't be. On a Corvette there is a rubber seal that fills this area. It is called the Door Gla...


Corvette_Door_Handle_Lock_Rod_lead1

1969-1982 Corvette Door Handle & Lock Rod Installation

Do you have to pull your Corvette’s inside door handle way past center to open your door from the inside? Maybe the inside handle will no longer release. The only way you can open the Corvette Door from the inside is to r...


corvette_steering-lead

1963-1982 Power Steering Valve, Ram & Pump Rebuild

You back your Corvette out of the garage and there they are…two or three red drops in the area of the power steering components. You hope it will cure itself, but it doesn’t.  Soon, the drops are puddles. Are the l...



1957-1975-corvette-horn-repair-lead1

1957-1975 Corvette Horn Rebuild

Does only one horn in your dual horn system work? Do your Corvette horns sound like a cow with a stomach ache? We all know what the solution is. Replace the horns. There is nothing wrong with this solution, but what if you want...


driveshaft-u-joint-replacement_lead-1

1956-1982 Corvette Driveshaft U-Joint Replacement

The only link between your Corvette’s transmission and the rear end is the driveshaft. All of your car’s power is transferred to the rear end through the driveshaft. It is an integral part of the drivetrain which is...


corvette-clock-rebulid

1963-1982 Corvette Clock Quartz Rebuild

The one common problem most 1963-1982 Corvettes have is a clock that does not work. These electric clocks all seem to self destruct or if they do work, they are so slow, you might as well not have a clock at all. The remedy for...