LEFT: Here we have removed the old seal and are about to remove the remaining seal securing tips with a pair of pliers.

BELOW LEFT: Now clean the remains of old adhesive and seal remnants off the T-top. This is where the 3M Adhesive Cleaner will help dissolve the material. Take a shop rag and soak it in the cleaner, then start rubbing. If possible, apply the cleaner directly to the old adhesive and let it sit for a few minutes. Just be careful not to get it on anything else. If you do, wipe it off immediately.

and door seals is similar. It’s definitely worth a few hours in an afternoon.