LEFT: Start the removal of the old seals by rolling it back and spraying the Release Agent where the seal is glued.

BELOW LEFT: The T-top seals have these white hard plastic tips in the seals that help hold the seal in place. They come preinstalled in the new seal so we will need to go back and remove these.

BELOW RIGHT: A screwdriver can help with the removal of the old seal, especially around the securing tips.

    After clean-up, apply adhesive to both pieces being bonded and let them sit for 10-15 minutes to get tacky, then bring them together. It’s good to have an assistant to hold the seal away from the surface while you snug the seal into place.
    Follow along as we do one side of the T-top so you can see how easy the whole process is. Replacing the window side pillar

<% Set Ad = Application("Ad") %> <% arrTags = Array("ad.size.promo", "ad.border.0", "site.corvettemagazine") %> <% = Ad.GetAd(Response, arrTags, Null ) %>