LEFT: Here is a close-up of the condition of our T-top seals. This is the underside that should seal with the top of the window.

BELOW LEFT: Here’s a close-up of the seal after it was removed.

    Replacing the seals in a C3 Corvette is not a difficult job. The best advice is to let the chemicals do their job. The 3M Release Agent works great if you allow it a few minutes to soak into the old adhesive. And the 3M Adhesive Cleaner effectively finishes the clean-up task. It is a simple matter of rolling back the seals, spraying on the Release Agent where the seals meet the surface it's bonded to, letting it sit for a few minutes, then removing the old seal. If it rips or pieces stay on, that’s okay because the Cleaning Agent will remove them