Top: After plugging in the new visor, insert it back through the hole in the sunvisor mount. Don’t forget to put it through the hole in the interior header panel first. Once you have it in the mount, put on the spring, then the large washer retainer. A 10mm deep socket can be used to compress the retainer over the visor stud, then reinstall the small retaining nut and use the same method with the 10mm socket to push it over the stud.

Bottom: Now reinstall the top cover. Be sure to put the lip of the cover under the edge of the interior header molding. Once you have done this, reinstall the header panel and then finally the rear view mirror. Now you can take that top off whenever the sun is out and not be embarrassed by those terrible looking sunvisors.