Top Left: Now remove the top cover, which is retained by two Phillip screws. There is a lip on this trim piece that slides under the interior header molding.
Bottom Left: You can now see the clip that retains the visor. With a small flat-head screwdriver and pointed awl, pry off the clip, then the washer that has gripping teeth on it. Be careful so you can reuse the washer. There is a spring underneath which also needs to be reused with the new visors.
Top Right: Once the clips and springs are removed, the visor is ready to come out, but you still have to unplug it if you have a lighted mirror. On 1984-85 Corvettes, you will have to change the plug to be able to plug in the new visor.
Bottom Right: These are the original replacement visors from Zip Products. The part numbers we ordered were I-1600 and I-1602. The install kit numbers were I-1128 and I-1129. Zip Products also has the plug kits.

<% Set Ad = Application("Ad") %> <% arrTags = Array("ad.size.promo", "ad.border.0", "site.corvettemagazine") %> <% = Ad.GetAd(Response, arrTags, Null ) %>