LEFT: Custom Autosound’s Sound Bar system mounts in the rear of the coupe. The center panel connects the left and right speaker modules to give a seamless, smooth appearance while the two plastic pieces are the bass port covers.

BELOW LEFT: Start by disassembling the front of the dash to remove the original radio. This involves removing the wiper/washer switch console and disconnecting its wiring, removing the forward console extensions, pulling the knobs off the stock radio and using a 9/16-inch deep socket to remove the retaining nuts.

that the Custom Autosound radio controls the remote Kenwood CD player as well, so there's no need for a remote control - everything is accessed right from the front of the radio itself, allowing it to have a quasi-retro look as well.
    Custom Autosound provides directions for the installation, so