LEFT: Here is the Custom Autosound AM/FM/Cassette/CD-Controller radio and the two 6x9-inch speakers for the front kick panels. The blue module below the speaker is an interference filter to eliminate ignition noise, but it wasn't required for this installation, since the stereo radio sounds fine without it.

BELOW LEFT: This is the 10-CD Kenwood changer with mounting brackets, CD magazine, and controller cable. The single cable is all that's required to connect the changer to the radio. It is not an FM-modulated changer - it is controlled directly via the radio panel.

front speakers to replace the originals behind the kick panels and rear speakers in Custom Autosound’s Sound Bar system. The installation was done prior to installing new front carpeting in the car so you could see the process a bit more clearly. The nice thing about this installation is