Our car did not have the vapor separating plastic attached to the door, but most will, so remove it from the retaining caulk to access the inner structure of the door. Use a 7mm socket to remove all of the screws around the outside edge of the aluminum brace. Then use a 10mm socket to remove the bolts that hold the brace to the regulator (at the bottom of the brace) and the window stop (at the top rear of the brace).

Remove the power lock rod located at the back of the brace by pushing the rod out of the plastic lock that holds it to the swivel. You might have to use a little force because the lock can be stubborn.

<% Set Ad = Application("Ad") %> <% arrTags = Array("ad.size.promo", "ad.border.0", "site.corvettemagazine") %> <% = Ad.GetAd(Response, arrTags, Null ) %>